# Unique code of this Data Store Server. Not more than 40 characters.
data-store-server-code = DSS1

# The root directory of the data store
storeroot-dir = data/store

# The directory where the command queue file is located; defaults to storeroot-dir 
commandqueue-dir =

# Port
port = 8444

# Network settings
# Should the DSS web page be served with SSL encryption?
use-ssl = true
# Should Java NIO selector-based sockets be used?
# Set this to false when running on JRE 1.6 as this version has bugs which make NIO very slow.
use-nio-selector-socket = true


# Session timeout in minutes
session-timeout = 720

# The root directory for session workspace directories
session-workspace-root-dir = data/sessionWorkspace

# Cache for data set files from other Data Store Servers
cache-workspace-folder = ../../data/dss-cache

#
# Data set authorization cache
#

# The expiration time of entries in the dataset authorization cache in minutes
# (set to 0 to disable the dataset authorization cache completely)
authorization-cache-expiration-time = 5

# The time period between two runs of the authorization cache cleanup timer in minutes 
authorization-cache-cleanup-timer-period = 180

# Path to the keystore
keystore.path = etc/openBIS.keystore

# Password of the keystore
keystore.password = changeit

# Key password of the keystore
keystore.key-password = changeit

# The check interval (in seconds)
check-interval = 60

# The time-out for clean up work in the shutdown sequence (in seconds).
# Note that that the maximal time for the shutdown sequence to complete can be as large 
# as twice this time.
# Remark: On a network file system, it is not recommended to turn this value to something 
# lower than 180.
shutdown-timeout = 180

# If free disk space goes below value defined here, a notification email will be sent.
# Value must be specified in kilobytes (1048576 = 1024 * 1024 = 1GB). If no high water mark is
# specified or if value is negative, the system will not be watching.
highwater-mark = -1

# If a data set is successfully registered it sends out an email to the registrator. 
# If this property is not specified, no email is sent to the registrator. This property
# does not affect the mails which are sent, when the data set could not be registered.
notify-successful-registration = false

# The URL of the openBIS server
server-url = https://localhost:8443

# Time out for accessing openBIS server. Default value is 5 minutes.
#server-timeout-in-minutes = 10

# The username to use when contacting the openBIS server
username = etlserver

# The password to use when contacting the openBIS server
password = etlserver

#
# JMX memory monitor
#

# Interval between two runs of the memory monitor (in seconds). 
# Set to -1 to disable the memory monitor.
memorymonitor-monitoring-interval = 60
# Interval between two regular log call of the memory monitor (in seconds).
# Set to -1 to disable regular memory usage logging. 
memorymonitor-log-interval = 3600
# The percentage of memory that, if exceeded, triggers a notify log of the memory manager, 
# Set to 100 to disable.
memorymonitor-high-watermark-percent = 90

#
# CIFEX configuration: Only needed if data export should work without the user having to type in 
# his password. Note that in in order for this to work the CIFEX server needs to be configured to 
# allow calling setSessionUser() from the IP address of this data store server, see configuration 
# option allowed-ips-for-set-session-user in CIFEX's service.properties    
#

# The admin username to use when contacting the CIFEX server 
cifex-admin-username =

# The admin password to use when contacting the CIFEX server 
cifex-admin-password =

# The base URL for Web client access.
download-url = https://localhost:8444

# The minimum time (in seconds) of availability of the data stream since the time when user requested
# for the data stream url. Default: 20s.
# data-stream-timeout = 20

# ---------------------------------------------------------------------------
# WebStart Applications
# ---------------------------------------------------------------------------
# The webstart-jar-path is the location of jars for webstart programs. By default, it points to the
# lib directory, which is usually the correct value. In some rare circumstances, it may make sense 
# to override and specify an alternate value.
# webstart-jar-path = lib/

# SMTP properties (must start with 'mail' to be considered). 
# mail.smtp.host = localhost
# mail.from = datastore_server@localhost
# If this property is set a test e-mail will be sent to the specified address after DSS successfully started-up.
# mail.test.address = test@localhost

# ---------------- Timing parameters for file system operations on remote shares.

# Time (in seconds) to wait for any file system operation to finish. Operations exceeding this 
# timeout will be terminated. 
timeout = 60
# Number of times that a timed out operation will be tried again (0 means: every file system 
# operation will only ever be performed once).
max-retries = 11
# Time (in seconds) to wait after an operation has been timed out before re-trying.  
failure-interval = 10 

# The period of no write access that needs to pass before an incoming data item is considered 
# complete and ready to be processed (in seconds) [default: 300]. 
# Valid only when auto-detection method is used to determine if an incoming data are ready to be processed.
# quiet-period = <value in seconds>

# ---------------------------------------------------------------------------
# Data sources
data-sources = path-info-db 

# Data source for pathinfo database
path-info-db.version-holder-class = ch.systemsx.cisd.openbis.dss.generic.shared.PathInfoDatabaseVersionHolder
path-info-db.databaseEngineCode = postgresql
path-info-db.basicDatabaseName = pathinfo
path-info-db.databaseKind = demo
path-info-db.scriptFolder = datastore_server/sql


# ---------------------------------------------------------------------------

# Globally used separator character which separates entities in a data set file name 
data-set-file-name-entity-separator = _

# Comma separated names of processing threads. Each thread should have configuration properties prefixed with its name.
# E.g. 'code-extractor' property for the thread 'my-etl' should be specified as 'my-etl.code-extractor'
inputs=main-thread

# ---------------------------------------------------------------------------
# 'main-thread' thread configuration
# ---------------------------------------------------------------------------
# The directory to watch for incoming data.
main-thread.incoming-dir = data/incoming

# If 'true' then unidentified and invalid data sets will be deleted instead of being moved to 'unidentified' folder
# Allowed values:
#  - false   - (default) move unidentified or invalid data sets to 'unidentified' folder
#  - true    - delete unidentified or invalid data sets
# delete-unidentified = true

# Determines when the incoming data should be considered complete and ready to be processed.
# Allowed values: 
#  - auto-detection - when no write access will be detected for a specified 'quiet-period'
#  - marker-file		- when an appropriate marker file for the data exists. 
# The default value is 'marker-file'.
main-thread.incoming-data-completeness-condition = marker-file

# The space the samples extracted by this thread belong to. If commented out or empty, then samples
# are considered associated to a database instance (not space private). 
# main-thread.space-code = <change this>

# Path to the script that will be executed before data set registration.
# The script will be called with two parameters: <data-set-code> and <absolute-data-set-path> (in the incoming dropbox).
# NOTE: before starting DSS server make sure the script is accessible and executable.
# main-thread.pre-registration-script = /example/scripts/my-script.sh

# Path to the script that will be executed after successful data set registration. 
# The script will be called with two parameters: <data-set-code> and <absolute-data-set-path> (in the data store).
# main-thread.post-registration-script = /example/scripts/my-script.sh

# The extractor class to use for code extraction
main-thread.data-set-info-extractor = ch.systemsx.cisd.etlserver.DefaultDataSetInfoExtractor
# Separator used to extract the barcode in the data set file name
main-thread.data-set-info-extractor.entity-separator = ${data-set-file-name-entity-separator}
# The index of the sample code in the name when splitted by the entity-separator
#main-thread.index-of-sample-code = -1
# The index of the codes of parent data sets (leave that commented out to _not_ have a data set parent)
#index-of-parent-data-set-codes = -2
# The space 
main-thread.data-set-info-extractor.space-code = TEST
# Location of file containing data set properties 
#main-thread.data-set-info-extractor.data-set-properties-file-name = data-set.properties

# IDataSetInfoExtractor working with CIFEX DataStoreTrigger
# main-thread.data-set-info-extractor = ch.systemsx.cisd.etlserver.cifex.CifexDataSetInfoExtractor

# The extractor class to use for type extraction
main-thread.type-extractor = ch.systemsx.cisd.etlserver.SimpleTypeExtractor
main-thread.type-extractor.file-format-type = TIFF
main-thread.type-extractor.locator-type = RELATIVE_LOCATION
main-thread.type-extractor.data-set-type = HCS_IMAGE
main-thread.type-extractor.is-measured = true

# ITypeExtractor working with CIFEX DataStoreTrigger
# main-thread.type-extractor = ch.systemsx.cisd.etlserver.cifex.CifexTypeExtractor
# main-thread.type-extractor.locator-type = RELATIVE_LOCATION
# main-thread.type-extractor.is-measured = true

# The storage processor (IStorageProcessor implementation)
main-thread.storage-processor = ch.systemsx.cisd.etlserver.DefaultStorageProcessor

# IStorageProcessor deleting files not matching specified regular expression
# main-thread.storage-processor = ch.systemsx.cisd.etlserver.CifexStorageProcessor
# main-thread.storage-processor.keep-file-regex = .*(?<!request\.properties)$ 


# ---------------------------------------------------------------------------
# dss-rpc
# ---------------------------------------------------------------------------
# The dss-rpc section configures the RPC put functionality by providing a mapping between data 
# set type and input thread parameters.
#
# The default input thread is specified by the put-default key. If not specified, the first input 
# thread will be used.
#
# Mappings are specified by dss-rpc.put.<data-set-type-code> = <thread-name>
#
# If this section is empty, then the first input thread will be used.
# 
dss-rpc.put-default = main-thread
# ---------------------------------------------------------------------------
# (optional) image overview plugins configuration
# ---------------------------------------------------------------------------

# Comma separated names of image overview plugins. 
# Each plugin should have configuration properties prefixed with its name.
# Generic properties for each <plugin> include: 
#   <plugin>.class   - Fully qualified plugin class name (mandatory) of a class 
#                      which implements IDatasetImageOverviewPlugin interface.
#   <plugin>.default - If true all data set types not handled by other plugins should be handled 
#                      by the plugin (default = false). 
#   <plugin>.dataset-types - Comma separated list of data set types handled by the plugin 
#                      (optional and ignored if default is true, otherwise mandatory). 
# Example:
#overview-plugins = default-overview, my-overview
#
#default-overview.class = ch.systemsx.cisd.openbis.dss.generic.server.plugins.demo.DemoOverviewPlugin
#default-overview.default = true
# Optional property specific to the plugin
#default-overview.label = default plugin
#
#my-overview.class = org.mycompany.MyOverviewPlugin
#my-overview.dataset-types = MY-DATASET-TYPE-CODE

# ---------------------------------------------------------------------------
# maintenance plugins configuration
# ---------------------------------------------------------------------------

# Comma separated names of maintenance plugins.  
# Each plugin should have configuration properties prefixed with its name.
# Mandatory properties for each <plugin> include: 
#   <plugin>.class - Fully qualified plugin class name
#   <plugin>.interval - The time between plugin executions (in seconds)
# Optional properties for each <plugin> include:
#   <plugin>.start - Time of the first execution (HH:mm)
#   <plugin>.execute-only-once - If true the task will be executed exactly once, 
#                                interval will be ignored. By default set to false.
# Configured but not enabled maintenance plugins:
# * path-info-feeding, enable this if you migrate from an instance without path info db
maintenance-plugins = post-registration, path-info-deletion

# Creates hierarchical version of the data store, based on the content of the database
#hierarchy-builder.class = ch.systemsx.cisd.etlserver.plugins.HierarchicalStorageUpdater
# The time between rebuilding the hierarchical store structure (in seconds)
#hierarchy-builder.interval = 86400
# The root directory of the hierarchical data store
#hierarchy-builder.hierarchy-root-dir = data/hierarchical-store
# The naming strategy for the symbolic links
#hierarchy-builder.link-naming-strategy.class = ch.systemsx.cisd.etlserver.plugins.TemplateBasedLinkNamingStrategy
# The exact form of link names produced by TemplateBasedLinkNamingStrategy is configurable
# via the following template. The variables
#   dataSet, dataSetType, experiment, instance, project, sample, space
# will be recognized and replaced in the final link name.
#hierarchy-builder.link-naming-strategy.template = ${space}/${project}/${experiment}/${datasettype}+${sample}+${dataset}
# When specified for a given <dataset-type> this store subpath will be used as the symbolic source 
#hierarchical-storage-updater.link-source-subpath.<dataset-type> = original
# Setting this property to "true" for a given <dataset-type> will treat the first child item (file or folder) 
# in the specified location as the symbolic link source. It can be used in conjunction with 
# the "link-source-subpath.<dataset-type>" to produce links pointing to a folder with unknown name e.g.
# <data-set-location>/original/UNKNOWN-NAME-20100307-1350
#hierarchical-storage-updater.link-from-first-child.<dataset-type> = true

# Maintenance task (performed only once) to create paths of existing data sets in pathinfo database
path-info-feeding.class = ch.systemsx.cisd.etlserver.path.PathInfoDatabaseFeedingTask
path-info-feeding.compute-checksum = true
path-info-feeding.execute-only-once = true

# Maintenance task for deleting entries in pathinfo database after deletion of data sets
path-info-deletion.class = ch.systemsx.cisd.etlserver.plugins.DeleteFromExternalDBMaintenanceTask
path-info-deletion.interval = 120
path-info-deletion.data-set-table-name = data_sets
path-info-deletion.data-source = path-info-db
path-info-deletion.data-set-perm-id = CODE

# Maintenance task for post registration of all paths of a freshly registered data set to be fed into pathinfo database  
post-registration.class = ch.systemsx.cisd.etlserver.postregistration.PostRegistrationMaintenanceTask
post-registration.interval = 30
post-registration.cleanup-tasks-folder = ../../cleanup-tasks
# The following date should the day when the DDS is started up the first time with PathInfoDatabaseFeedingTask.
# After PathInfoDatabaseFeedingTask has been performed it can be removed and the following line can be deleted.
post-registration.ignore-data-sets-before-date = 2011-04-18
post-registration.last-seen-data-set-file = ../../last-seen-data-set-for-postregistration.txt
post-registration.post-registration-tasks = pathinfo-feeding
post-registration.pathinfo-feeding.class = ch.systemsx.cisd.etlserver.path.PathInfoDatabaseFeedingTask
post-registration.pathinfo-feeding.compute-checksum = true

# ---------------------------------------------------------------------------
# processing plugins configuration
# ---------------------------------------------------------------------------

# Comma separated names of processing plugins. Each plugin should have configuration properties prefixed with its name.
processing-plugins = path-info-db-consistency-check

# Processing task that checks the consistency between the data store and the meta information stored in the PathInfoDB.
# It sends out an email which contains all differences found. 
path-info-db-consistency-check.label = Path Info DB consistency check
path-info-db-consistency-check.dataset-types = .*
path-info-db-consistency-check.class = ch.systemsx.cisd.openbis.dss.generic.server.plugins.standard.DataSetAndPathInfoDBConsistencyCheckProcessingPlugin

#
# FTP / SFTP server configuration
#
# The built-in FTP / SFTP server provides users with an alternative way to download their data using
# client programs like FileZilla or lftp. 
#
# When set to 'true' an internal ftp / sftp server will be started. Note that to really startup a 
# server in addition ftp.server.ftp-port and / or ftp.server.sftp-port need to be set to a value other 
# than 0.
ftp.server.enable = true
ftp.server.sftp-port = 2222 


jython-version=2.7

# Typical options to disable coping general, owner and group permissions
# rsync-options = --no-p --no-o --no-g


#
# CIFS Server configuration
#
# The build-in CIFS server provides users with an alternative way to download their data using
# client programs like Mac Finder or Windows Explorer. 
#
# cifs.server.enable = true
# cifs.server.smb-port = 1445
# cifs.server.session-log-flags = Error